■   Product Introduction

     Input reactors orrer overload to line power supply and reduce harmonic distortion arising from frequency inverters,also improve the input supply,reduce ultraharmonic and suppress the surge caused by frequency inverters to the power supply units. 

■  Product Application

     Particularly apply to the following cases:
    1. Multiple frequency inverters in close parallel connection
    2.Other devices produce interference to line power supply.(disturbance,, over voltage
    3.Nonbalance among phases of line power supply.( 1.8% over than of the rated voltage
    4.Massive frequency inverters installed on the same line
    5.Reduce cos∮and correct the overload of capacitor,in case the power factor correction  devices are installed in system

■  Technical Specifications

• Work Voltage：220VAC-3300VAC
• Work Frequency：50/60Hz.
• Work Current：3A-1600A
• Insulation Class：classF，H
• Protection class：：IP00-IP22
• Voltage drop：＜4%大于此范围会引起转矩损失
• Max Current：：1.5×额定电流，持续60S
• Noise：≤65dB
• Temperature Rise：≤85K
• Dielectric strength：铁芯-绕组3000VAC/50Hz/5mA/10S无飞狐击穿（工厂测试）
• Insulation Resistor：1000VDC绝缘阻值≥100MΩ

          Operation Environment:-10~+45 ℃,rated value wont′t lower,when higer than 55℃,and every 1℃,thecurrent will step down 2%, Under seal level 2000m
          Running ambient temperature -25 ℃ ~ +45 ℃, comparative moisture not over 90%.
          No hazardous gas,no inflammables and explosives With well-ventilated condition,ventilation devices shall be mounted if installatioh in panel

■  Applicable Standards

1. IEC289:1987 Reactor
2. GB10229-88 Reactor
3. JB9644-1999 Reactor used for semiconductor electrical driving

■  Product Size

                             

■  380V AC Input Reactor

■  690V AC Output Reactor

*Remark：Dimension can be customization

■  成品识别码