■  Product Introduction

DC smoothing reactor rectifier circuit being used to suppress ripple rectified pulsating  component and make rectified current continuously Improve the output waveform tributaries.to ensure the normal operation of the DC devices.

■  Product Application

• 1.Suppress the waveform distortion of input current caused by capacitive filtering 
  2.Reduce and avoid overheat of capacity and rectifier bridge damage both of which arise form  surge current 
  3.Improve power factor and reduce the DC busbar AC pulse. 
  4.Limit the instant change of the grid voltage 
  5.Work with capactor to suppress or filter the current ripple for eliminating .negative influence  onload
  

■  Technical Specifications

      1 .Work voltage: 220VAC-1140VAC 
      2.Work frequency: 50/60Hz. 
      3.Work current: 3A-1600A 
      4.Insulation class: class F, H 
      5.Operation Environment:-10~…+45 ℃,rated value wont′t lower,when higer than 45℃,and every  1℃,the current will step down 2% 
      6.Protection class: IP00-IP22 
      7.Max Current: 1.5 × Rated current,continuous 60S 
      8:Noise: ≤ 65dB 
      9.Temperature Rise: ≤ 85K 
     10.Dielectric strength: Core Coil 3000VAC/50Hz/5mA/10s no electric arcing puncture (factory test) 
     11.Insulation Resistor: 1000VDC insulation resistance value ≥ 100M? 
     12.Under seal level 2000m
     13.Running ambient temperature -25 ℃ ~ +45 ℃, comparative moisture not over 90%. 
     14.No hazardous gas,no inflammables and explosives 
     15.With well-ventilated condition,ventilation devices shall be mounted if installatioh in panel

■  Applicable Standards

1. IEC289:1987 Reactor
2. GB10229-88 Reactor（eqvIEC 289:1987）
3. JB9644-1999 Reactors used for semiconductor electrical driving

■  Product Size

                                                     

■  Product Identification Code