■    Product Introduction

The nonlinear currents generated by the massive use of modern power and electric equipment are impacting the power grid and aggravate its pollution in the harmonic form, cause overload failures to capacitors, transformers and transmission devices and generate serious interference to measuring, transmitting and calculating devices; in addition, resonance and voltage distortions may also result in power supply accidents. Series reactors could effectively improve or avoid such problems. After installing the capacitor and reactor in series, the resonance frequency is lower than the minimum of the system (usually 5th and 7th waves), so that compatibility is showed under power frequency and power factor is improved; meanwhile, there is no need to worry about the amplification of harmonic wave. With satisfactory impedance matching, the capacitor bank could absorb 30% to 60% of the harmonic currents (5th harmonic wave, for example).

■     Product Application

• Operating frequency：50Hz-60Hz
• Rated operating current：5A-2000A
•  Rated operating voltage：220V-10KV
• Temperature rise：≤95K
• Noise：≤65dB
• Three-phase equilibrium degree：-5%…+5%
• Reactive Strength：core-winding3000VAC/50Hz/5mA/10s free of arcing breakage(ftested in factory)
•  Insulation Resistance：1000VDC，insulation resistance≥100MΩ
•  Degree of protection：IP00-IP20
•  Reduction factor：5,67%，7%，14%
• Pn Performance range Pn：5Kvar…100kvar
• Monitoring：temperature switch is integrated，contacts are fitted on terminals.
•  Temperature classes：ta40℃/F,H
•  Installation altitude：≤2000m above sea level
• Storage temperature：-25℃…+55℃
• Transport temperature：-25℃…+70℃
• Permissible humidity rating：humidity 5%…95% occasional condensation permissible

■   Applicable Standards

• IEC289:1987 Reactor
• GB10229-88 Reactor（eqvIEC289:1987）
• JB9644-1999 Reactor used for semiconductor electrical driving

■   Product Identification Code

        

                         

    Choking factor p = 5.67 %, L = constant to 1.82 · Ithmax, fRES = 210 Hz

Choking factor p = 7 %, L = constant to 1.66 · Ithmax, fRES = 189 Hz

Choking factor p = 14 %, L = constant to 1.4 · Ithmax, fRES = 134 Hz